Marked to IS 303, ISI marked
TIME WOOD BWP Grade Gurjan Plywood
ISI certified phenolic bonded BWP plywood in 4–25 mm, with a calibrated finish and a 25 year warranty.
Tulsi Power
Tulsi T-Power Gurjan Plywood
BWP bonded plywood on a hardwood core with a full-core Gurjan face, supplied at 18 mm in 1830 × 1220 mm sheets.
- Grade
- BWP
- Bond
- BWP bonded
- Core
- Hardwood
- Thickness
- 18.0 mm
- Sheet size
- 1830 × 1220 mm (6 × 4 ft)
- Packing
- 9 sheets per bundle
Check this against the sheet
Grade, thickness, size and batch are stamped on every sheet, so what arrives can be checked against this specification rather than taken on trust.
Available grades
- BWP bonded
Enquire about this product
Rate depends on thickness, grade and quantity. Send the specification — or just the room it is going in — and we will come back within one working day.
Overview
About this product
Tulsi T-Power is a BWP bonded panel built on a hardwood core with a full-core Gurjan face veneer, in an alternate red-white layup.
The supplied specification is 18 mm in 1830 × 1220 mm (6 × 4 ft) sheets, packed nine sheets to a bundle. That size suits shutter and carcass work where a full 8 × 4 sheet would mostly become offcut.
The board is marked smooth, strong and sturdy — which in practice means a calibrated face ready for lamination and a core dense enough to hold hardware under load.
Why it is specified
Benefits
- Sheet size matched to shutter work, so less of the panel becomes offcut
- Stiff enough for loaded shelving without doubling up
- BWP bond suitable for kitchens and bathrooms
- Calibrated face reduces site preparation before lamination
Features
What the construction gives you
Each of these is a build decision, not a marketing line — and each one changes how the panel behaves on site.
BWP bonded
Boiling water proof bonding for damp and wet locations.
Hardwood core
Dense core that holds screws and carries load without deflection.
Full-core Gurjan face
No core gaps beneath the face veneer.
18 mm calibrated
Consistent thickness for flush shutters and accurate hardware fit.
6 × 4 ft sheets
1830 × 1220 mm, which reduces waste on shutter-sized cutting lists.
Alternate red-white layup
Balanced construction that stays flat.
| Grade | BWP |
|---|---|
| Bond type | BWP bonded |
| Core | Hardwood core |
| Face veneer | Gurjan, full core |
| Thickness | 18.0 mm |
| Sheet size | 1830 × 1220 mm (6 × 4 ft) |
| Packing | 9 sheets per bundle |
| Origin | Made in India |
Related products
You may also want to compare
Marked to IS 710
Club 710 Gurjan Waterproof Plywood
IS 710 waterproof plywood with a 100% Gurjan face, high load bearing capacity and a 30 year warranty.
Marked to IS 303:2024
Tulsi Silver + Proclab Gurjan Plywood
IS 303:2024 BWR type plywood, grade MB, with a 100% Gurjan face veneer and zero-gap full core construction.
Marked and traceable
IS code, BIS licence number, grade and batch stamped on the sheet — check it against what you were quoted.
Consistent between batches
Sourced from ISO 9001:2015 certified processes, so a repeat order behaves like the first one.
Written warranties
Manufacturer guarantees of 25 to 30 years against manufacturing defects across the range.
Answered in a working day
Send a cutting list, a drawing or a photo. Enquiries on a working day are answered the same day or the next.
Enquire
Ask for a price on Tulsi T-Power Gurjan Plywood
Tell us the thickness, grade and quantity you need and we will send a current rate with availability, within one working day. Not sure it is the right board? Describe the space and we will confirm it — or point you at a cheaper one that does the job.